TM 5-5420-202 -20-2
INSPECTION:
Inspect threaded components for thread damage. Replace or repair if defective.
INSTALLATION:
1.
2.
3.
RIGHT FUEL TANK RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 3 of 3)
Using 1-3/8 inch wrench, install adapter (A)
to fuel tank selector valve (B).
Install clamp (C) to tube (D).
Using 1-3/8 inch wrench and 1-1/2 inch
wrench, Ioosely install left nut of tube (D)
to fuel tank selector cock adapter (A).
4.
5.
6.
7.
8.
Using 1-1/2 inch wrench and 1-3/8 inch wrench, loosely install nut of tube (D) to right
fuel tank return hose (E).
Using 7/16 inch socket wrench, secure clamp (C) and tube (D) to hull floor with screw
(F) and lockwasher (G).
Tighten right and left nuts of tube (D).
Install powerplant (page 5-14).
Service fuel tanks (TM 5-5420-202-10).
End of Task
7-160