TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 513 of 734

TM 5-5420-202-20-2

MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

2.

3.

4.

5.

6.

Install elbow (A). Using 7/16 inch wrench,

tighten elbow.

Install bushing (B). Using 9/16 inch wrench,

tighten bushing.

Install elbow (C). Using 1/2 inch wrench,

—

tighten elbow.

Position new gasket (D)

(E) onto manifold.

Install four washers and

manifold heater.

Using 1/2 inch open end

nuts (F).

and manifold heater

new nuts (F) to secure

wrench, tighten

7.

8.

9.

10.

11.

Connect

Connect

Connect

lead.

Perform

fuel return tube (G) to elbow (A). Using 9/16 inch open end wrench, tighten tube.

fuel input tube (H) to elbow (C). Using 7/16 inch open end wrench, tighten tube.

ignition lead (J) to spark plug. Using 3/4 inch open end wrench, tighten ignition

manifold heater operation check (page 7-288).

Install powerplant (page 5-14).

End of Tas k

TA248402

7-27 8