TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 505 of 734
TM 5-5420-202-20-2
MANIFOLD HEATER FUEL RETURN TUBE ASSEMBLY REPLACEMENT (LEFT AND RIGHT
BANK) (Sheet 5 of 7)
INSTALLATION:
NOTE
Coat pipe thread fittings with
sealing
compound
before
installation
1. Using both hands, carefully
push tube assembly (A) down
through lower engine cooling
shroud opening (B).
2. Using 9/16 inch wrench, install
line nut of tube assembly (A)
on elbow (C) at manifold heater
(D).
3. Install grommet (E) on tube assembly
(A) with flat side of grommet facing
toward front of engine.
Go on to Sheet 6
7-270
TA248394
Back to Top
