TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 496 of 734

MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL

Input Solenoid Valve Replacement (Sheet 4 of 5)

INSTALLATION:

NOTE

Coat male threads of elbow, tee, and adapter

with sealing compound before installation.

1.

2.

3.

4.

5.

6.

Install and aline elbow (A) as shown to solenoid

valve (B). Using 9/16 inch wrench, tighten elbow.

Install and aline tee (C) to elbow (A) as shown. Using

7/16 inch wrench, tighten tee.

Install nipple (D) to solenoid valve (B). Using 7/16 inch

Using 7/16 inch wrench, hold nipple (D) and install fuel

as shown.

Position bracket (F) in place on engine.

TM 5-5420-202-20-2

LINE REPLACEMENT (Sheet 9 of 10)

wrench, tighten nipple.

filter (E) on nipple. Aline filter

Install two screws (G) to secure bracket. Using 7/16 inch wrench, tighten screws.

Go on to Sheet 5

TA248385

7-261