TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 494 of 734

TM 5-5420-202-20-2

MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 7 of 10)

Input Solenoid Valve Replacement (Sheet 2 of 5)

NOTE

Use suitable container to catch fuel whenever any fuel

line or connection is loosened or disconnected. Use cloth

to wipe any spillage. Discard cloth and drained fuel in

accordance with local procedures.

REMOVAL:

1.

2.

3.

4.

5.

6.

Disconnect electrical lead (A) from solenoid valve

Using 7/16 inch and 1/2 inch wrenches, disconnect

two fuel lines (C) from tee (D).

Using 1/2 inch and 5/8 inch wrenches, remove

tube (E) from adapter (F).

Using 5/16 inch wrench, remove two screws and

washers (G).

Using screwdriver, remove two screws (H) with

lockwashers and flat washers.

(B).

Remove solenoid valve (B), fuel filter (J), and attached

fittings as a unit.

Go on to Sheet 3

TA248383

7-259