TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 497 of 734

TM 5-5420-202-20-2

MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 10 of 10)

Input Solenoid Valve Replacement (Sheet 5 of 5)

7.

8.

9.

10.

11.

12.

13.

14.

Position solenoid valve (B) and fuel filter (E)

with attached fittings to brackets on engine.

Install two screws (H) with lockwashers

and flat washers to secure fuel filter (E)

to engine bracket.

Using screwdriver, tighten

screws.

Install two screws and washers (J) to secure

solenoid valve (B) to bracket.

Using 5/16 inch

wrench, tighten screws.

Connect two fuel lines (K) to tee (C). Using

7/16 inch wrench, tighten fuel line nuts.

Connect tube assembly (L) to adapter (M).

Using 1/2 inch and 5/8 inch wrenches, tighten

hose nut to adapter.

Connect electrical lead (N) to solenoid valve (B).

Operate purge pump (TM 5-5420-202-10)

Check for leaks. If leaks are found, tighten

connections as required.

Install powerplant (page 5-14).

TA248386

End of Task

7-262