TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 510 of 734

TM 5-5420-202-20-2

MANIFOLD HEATER NOZZLE REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

2.

3.

Using 13/16 inch and 9/16 inch wrenches,

install bushing (A) in new nozzle (B).

Using 9/16 inch and 1/2 inch wrenches,

install elbow (C) to bushing (A).

Using 7/16 inch wrench, install elbow

(D) into nozzle (B).

Install nozzle (B) with bushing (A) and elbows

(C) and (D) into manifold heater (E).

Aline nozzle for ease of connecting

fuel lines. Using 1 inch wrench, tighten

jamnut (F).

6.

Using two 7/16 inch wrenches, connect

input fuel line (G) to elbow (C).

7.

Using 7/16 inch and 9/16 inch wrenches,

install return fuel line (H) to elbow (D).

8.

Perform manifold heater operational

check (page 7-291).

9.

Install powerplant (page 5-14).

End of Task

TA24839 9

7-275