TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 535 of 734

TM 5-5420-202-20-2

ACCELERATOR LINKAGE ADJUSTMENT (Sheet 1 of 6)

TOOLS: 7/16 in. combination box and open end wrench

1/2 in. combination box and open end wrench (2 required)

9/16 in. combination box and open end wrench (2 required)

Long round nose pliers

Flashlight

FABRICATED TOOLS:

Throttle linkage adjusting go/no-go gage (Figure

F-3, Appendix

-

F )

SUPPLIES: 1/8 in. dia. by 2 in. by 4 in. long locating pins (2 required)

1/16 in. dia. by 2 in. long pin

Cotter pins (4 required)

PERSONNEL: Two

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Remove operator’s floor access plate (page 17-8)

Place shift lever in P (park) position (TM 5-5420-202-10)

Block tracks to prevent tank movement (TM 5-5420-202-10)

Remove upper engine access cover (page 17-11)

7-300