TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 543 of 734

TM 5-5420-202-20-2

ACCELERATOR CONTROL ROD REPLACEMENT (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

Removal

Cleaning and Inspection

Installation

TOOLS: 3/8 in. dia. drive punch

7/16 in. socket with 3/8 in. drive

9/16 in. socket with 3/8 in. drive

3/8 in. drive ratchet handle

Slip joint pliers

Ball peen hammer

Retaining ring pliers

Vise

PAGE

7-308

7-310

7-311

SUPPLIES:

Clean rags (Item 65, Appendix D)

Gloves (Item 69, Appendix D)

Dry cleaning solvent (Item 55, Appendix D)

Goggles (Item 70, Appendix D)

PRELIMINARY PROCEDURE:

Remove throttle control handle assembly (page 7-327)

REMOVAL:

1.

Using 9/16 inch socket, remove

two screws, lockwashers, and

flat washers (A).

Go on to Sheet 2

7-308