TM 5-5420-202-20-2
ACCELERATOR THROTTLE LINKAGE REPLACEMENT (Sheet 1 of 9)
PROCEDURE INDEX
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: 7/16 in. box end wrench
1/2 in. open end wrench
1/2 in. crowfoot attachment with 1/2 in. drive
6 in. cross-tip screwdriver
Slip joint pliers
Mechanic’s scribe
Torque wrench with 1/2 in. drive (100 lb-ft capacity)
PAGE
7-313
7-317
7-318
SUPPLIES:
Lint-free cloths (Item 12, Appendix D)
Paper (Item 72, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Gloves (Item 69, Appendix D)
Pencil (Item 71, Appendix D)
Goggles (Item 70, Appendix D)
Cotter pin (5 required)
PRELIMINARY PROCEDURE:
Remove operators floor access plate (page 17-8 ).
Go on to Sheet 2
7-313