TM 5-5420-202-20-2
ACCELERATOR LINKAGE ENGINE CONTROL REPLACEMENT (Sheet 1 of 2)
TOOLS:
9/16 in. socket with 1/2 in. drive
5 in. long extension with 1/2 in. drive
1/2 in. drive ratchet
7/16 in. combination wrench (2 required)
1/2 in. combination wrench
SUPPLIES: Clean rags (Item 12, Appendix D)
Gloves (Item 69, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Goggles (Item 70, Appendix D)
Pencil (Item 71, Appendix D)
Paper (Item 72, Appendix D)
PRELIMINARY PROCEDURE: Remove operator’s seat backrest (page 17-54)
Remove engine upper access cover (page 17-11)
Go on to Sheet 2
7-322