TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 553 of 734

TM 5-5420-202-20-2

ACCELERATOR THROTTLE LINKAGE REPLACEMENT (Sheet 6 of 9)

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

Screw nut (A) onto connecting link(B).

Screw clevis (C) onto connecting link(B). Rotate clevis (C) to number of turns recorded.

Using torque wrench and crowfoot attachment,

tighten nut (A) between 6-8 lb-ft (8-11 N m)

while holding clevis (C) with pliers.

Connect clevis (C) to bellcrank lever

(D). Insert straight pin

(E) into connected clevis

(C) and bellcrank lever(D).

Using pliers, install cotter

pin (F) to straight pin(E).

Mount assembled linkage (G) to bracket (H).

Insert straight pin (J) through bracket (H).

Using pliers, install cotter pin (K) to straight pin (J).

Go onto Sheet 7

7-318