TM 5-5420-202-34
FUEL TANK (LEFT) LOWER FRONT MOUNTING BRACKET REPLACEMENT (Sheet 2 of 2)
2.
Using 1/2 inch wrench to hold screw
(A) and another 1/2 inch wrench to loosen
nut (B), remove four nuts (B), lockwashers
(C), flat washers (D), and screws (A).
3.
Remove mounting bracket (E) from
fuel tank.
INSTALLATION:
1.
2.
3.
4.
5.
End
Position mounting bracket (A) onto
mounting brackets of fuel tank. Insert
four screws (B) through alined holes.
Install four flat washers (C), new lockwashers
(D), and nuts (E) onto screws (B) securing
mounting bracket assembly to fuel tank.
Using fingers, tighten four nuts (E).
Using 1/2 inch wrench to hold screw
(B) and another 1/2 inch wrench to nut
(E), tighten all four nuts (E).
Install left fuel tank (page 7-356).
of Task
4-76
7-398
Change 5
TM 5-5420-202-20-2