TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 660 of 734

TM 5-5420-202-20-2

RIGHT EXHAUST EJECTOR TUBE REPLACEMENT (Sheet 3 of 4)

INSTALLATION:

4.

5.

6.

1.

Position insulation (A and B) to ejector

tube (C).

2.

Using cross-tip screwdriver and 5/16 inch

wrench, install 11 screws (D), 22 flat

washers (E), 11 new lockwashers (F), and

11 nuts (G) to secure insulators (A and B)

to ejector tube (C).

3.

Position packing (H) and clamp (J) onto

ejector tube (C). Use flat-tip screwdriver

to tighten clamp (J).

Apply coating of silicone compound

to end of hose (K).

Position right exhaust ejector tube (C)

and new gasket (L) onto studs of turbo-

supercharger (M) and hose (K).

Using 9/16 inch wrench, install six new

self-locking nuts (N) to secure right ex-

haust ejector tube (C) to turbosuper-

charger (M).

Go on to Sheet 4

Change 1

8-27