TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 656 of 734

TM 5-5420-202-20-2

LEFT EXHAUST EJECKTOR TUBE REPLACEMENT (Sheet 3 of 4)

INSTALLATION:

1.

2.

3.

4.

5.

Position insulation (A and B) to ejector

tube (C).

Using cross-tip screwdriver and 5/16 inch

wrench, install 11 screws (D), 22 flat

washers (E), 11 new lockwashers (F), and

11 nuts (G) to secure insulation (A and B)

to ejector tube (C).

Position packing (H) and clamp (J) onto

ejector tube (C). Use flat-tip screwdriver

to tighten clamp (J).

Apply a light coat of silicone compound

to end of two hoses(K).

Position left exhaust ejector

new gasket (L) onto studs of

tube (C) and

turbosuper-

charger housing (M).

Go on to Sheet 4

6.

Using 9/16 inch wrench, install six new

self-locking nuts (N) to secure left ex-

haust ejector tube (C) to turbosuper-

charger housing (M).

Change 1

8-23