TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 658 of 734

TM 5-5420-202-20-2

RIGHT EXHAUST EJECTOR TUBE REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

8-25

Installation

8-27

TOOLS:

10 in. adjustable wrench

No. 1 cross-tip screwdriver

9/16 in. open end wrench

7/8 in. combination box and open end wrench

5/16 in. combination box and open end wrench

Screwdriver, flat-tip, 1/4 in.

SUPPLIES:

Lockwasher (11 required)

Gasket

Self-locking nut (6 required)

Silicone compound (Item 32, Appendix D)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-2)

REMOVAL:

1.

2.

Using adjustable wrench to hold elbow (A)

and using 7/8 inch wrench, disconnect nut

(B) from elbow (A).

Using flat-tip screwdriver, loosen

clamp (C).

Go on to Sheet 2

Change 1

8-25