TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 654 of 734

TM 5-5420-202-20-2

LEFT EXHAUST EJECTOR TUBE REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

8-21

Installation

8-23

TOOLS:

No. 1 cross-tip screwdriver

9/16 in. open end wrench

5/16 in. combination box and open end wrench

1/2 in. combination box and open end wrench (two required)

Screwdriver, flat-tip, 1/4 in.

SUPPLIES:

Lockwasher (11 required)

Gasket

Self-locking nut (7 required)

Silicone compound (Item 32, Appendix D)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-2)

REMOVAL:

1.

2.

Using flat-tip screwdriver, loosen two

clamps (A).

Using two 1/2 inch wrenches, hold nut (B)

and remove screw (C) securing clamp (D)

to left ejector tube bracket (E).

Go on to Sheet 2

Change 1

8-21