TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 649 of 734

TM 5-5420-202-20-2

CAP ASSEMBLY REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

2.

3.

4.

If bracket (A) was removed, position new bracket (A) onto engine. Using 1/2 inch socket,

install two screws (B) to secure bracket (A).

Position new gasket (C) and cap assembly

(D) to intermediate tube assembly (E).

Using 7/16 inch socket, install screw (F)

and new lockwasher (G) to secure cap

assembly (D).

Using 1/2 inch socket, install screw (H)

and new lockwasher (J) to secure cap

assembly (D).

5.

6.

7.

8.

9.

10.

Install clamp (K) onto cap assembly (D).

Using 1/2 inch socket and wrench, install

screw and new nut (L) to secure clamp (K)

to bracket (A).

Coat ends of hoses (M and N) with silicone

compound (Item 32, Appendix D).

Position hoses (M and N), tube (P), and

clamps (Q), removed as a unit, to mani-

fold (R) and cap assembly (D).

Using screwdriver, tighten clamps (Q) to

secure hoses (M and N) to manifold (R)

and cap assembly (D).

Close top deck grille doors (TM 5-5420-

202-10).

End of Task

8-16

Change 1