TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 643 of 734

TM 5-5420-202-20-2

EXHAUST PIPE (RIGHT SIDE) REPLACEMENT

REMOVAL:

1.

Using adjustable wrench to hold elbow

(A), use 7/8 inch wrench and loosen

fitting (B).

2.

Using hammer, tap elbow (A) and lift

tube (C) from exhaust pipe.

3.

Using 9/1 6 inch socket and open end

wrench, remove six nuts (D) holding

exhaust pipe (E) to turbosupercharger

housing (F).

Remove exhaust pipe (E)

with insulation halves (G) and gasket

(H) from turbosupercharger housing

(Sheet 2 of 4)

(F). Throw gasket (H) away.

4.

5

*

6 .

Using cross-tip screwdriver and

5/16 inch wrench, remove 14 screws

(J), each with two flat washers

(K), one lockwasher (L), and one

nut (M) holding insulation halves

(G) to exhaust pipe (E).

Using flat-tip screwdriver, remove

clamp (N) from packing (P). Remove

packing (P) from pipe (E).

Remove insulation halves (G) from

exhaust pipe (E).

Go on to Sheet 3

8-10