TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 78 of 734
TM 5-5420-202-20-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 3)
TOOLS: T-slide handle with 3/4 in. drive (2 required)
36 in. extension (cheater bar)
1-1/8 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
1-1/8 in. open end wrench
Torque wrench with 3/4 in. drive (0-600 ft-lb) (0-813 NŽm)
SUPPLIES:
Dry cleaning solvent (Item 55, Appendix D)
Gloves (Item 69, Appendix D)
Rags (Item 65, Appendix D)
Goggles (Item 70, Appendix D)
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-2).
NOTE
Removal and installation of left and right
engine mounts are the same.
REMOVAL:
1.
Using 1/2 inch socket, remove two screws
(A) and washers (B) securing bracket (C).
Remove bracket (C).
Go on to Sheet 2
6-5
Back to Top
