TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 75 of 734
TM 5-5420-202-20-2
REAR POWERPLANT GUIDE (LEFT OR RIGHT) REPLACEMENT (Sheet 1 of 2)
TOOLS: 9/16 in. combination box and open end wrench
Ball peen hammer
Long round nose pliers
Slip joint pliers
Chisel
Brass drift
SUPPLIES:
Connecting ring
Sleeve bearing
Wood block, 4 x 6 (approximately)
REFERENCE:
TM 9-237
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-2)
REMOVAL:
1.
Using wrench, remove screw (A), lockwasher (B), and flat washer (C) securing rear power-
plant guide assembly (D) to support (E).
2.
Using hammer, tap guide assembly (D) from mounting place. Remove guide assembly from
vehicle.
3.
Using brass drift, drive bearing (F)
from support.
4.
Using long nose pliers, remove cotter
pin (G) and latch (H).
5.
Using chisel, cut ring (J).
6.
Using slip joint pliers, separate ring
(J) and remove ring (J), spring (K), and
pin (L).
Go on to Sheet 2
6-2
Back to Top
