TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 94 of 734
TM 5-5420-202-20-2
ENGINE OIL COOLER (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 6)
11.
12.
Using 1/2 inch socket with extension
through harness and into bracket, remove
two screws and lockwashers (J).
Lower harness away from coolers with
bracket attached.
13.
Using 1/2 inch socket, remove four screws and
lockwashers (K) holding oil cooler screen
to cooler.
14.
Lift away oil cooler screen.
Support oil cooler to keep it from falling while doing step 15.
15.
Using 3/4 inch socket, remove four screws and lockwashers (L) holding oil cooler frame.
16.
Lift away oil cooler and mounting brackets.
Go on to Sheet 4
6-21
Back to Top
