TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 95 of 734
TM 5-5420-202-20-2
ENGINE OIL COOLER (LEFT AND RIGHT) REPLACEMENT (Sheet 4 of 6)
INSTALLATION:
1.
2.
3.
4.
5.
6.
Place oil cooler and oil cooler screen mounting
bracket into place on oil cooler frame.
Start threads of four screws with lockwashers
(A) by hand to hold oil cooler in place.
Using 3/4 inch socket, tighten screws(A).
Lift screen into place onto oil cooler.
Start threads of four screws with lockwashers
(B) by hand to hold oil cooler screen in place.
Using 1/2 inch socket, tighten screws and
lockwashers (B).
Go onto Sheet 5
7.
Lift starter cable mounting
bracket (C) into place at top
of oil cooler.
8.
Start threads of four screws
with lockwashers (D) by hand.
9.
Using 1/2 inch socket, tighten screws and
lockwashers (D).
6-22
Back to Top
