TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 210 of 1060

TM 5-5420-202-20-3

HEADLIGHT BEAM SELECTOR SWITCH ASSEMBLY MOUNTING BRACKET REPLACEMENT

(Sheet 1 of 1)

TOOLS:

7/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Lockwashers (4 required)

PRELIMINARY PROCEDURE:

Remove headlight beam selector switch assembly

(page 10-169)

REMOVAL:

1.

2.

Using socket, remove four screws

(A), flat washers (B), and internal

tooth lockwashers (C) securing

mounting bracket (D) to hull.

Remove mounting bracket (D).

INSTALLATION:

1.

Place mounting bracket (D) in position on hull floor.

2.

Using socket, install four screws (A), internal tooth lockwashers (C), and flat washers

(B) securing mounting bracket to hull.

3.

Install headlight beam selector switch assembly (page 10-170).

End of Task

TA249112

10-171