TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 218 of 1060

TM 5-5420-202-20-3

HEADLIGHT ASSEMBLY REPAIR (LEFT AND RIGHT) (Sheet 7 of 8)

NOTE

Make sure red and clear lenses (M) are

positioned as shown.

6. Place headlight lens and seals (M) in notches

of’ headlight cover (N) with rounded sides outward.

7. Using cross-tip Screwdriver install six screws

and lockwashers (P) and two retainers (Q) in

position over two lenses (M) arid tighten.

8.

9.

NOTE

Make sure filter (T) is positioned in

blackout marker cavity (V) properly.

Using fingers, install seal (R), lens (S), filter (T),

and seal (U) in blackout marker cavity (V).

Using cross-tip screwdriver, install two

screws (W) with assembled washers to secure

retainer (X).

Using fingers, install one seal (Y) in blackout

headlight shield (Z).

Using fingers, install blackout headlight lens

(AA) in position on blackout headlight shield (Z).

Using cross-tip screwdriver, install other seal (Y)

and retainer (AB) into headlight shell (Z) with

two screws and lockwashers (AC).

Go on to Sheet 8

TA249120

10-179