TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 226 of 1060

TM 5-5420-202-20-3

HEADLIGHTS STOWAGE LAMP HOLDER REPLACEMENT (Sheet 1 of 1)

TOOLS: 7/16 in. combination box and open end wrench

SUPPLIES:

Lockwashers (3 required)

NOTE

There are two lampholders in the

crew compartment,

Removal and

installation are the same for each

lampholder.

INSTALLATION:

REMOVAL:

1.

Using hand, remove dust

counter clockwise.

2.

Using wrench, remove

lockwashers (C), and flat

3.

Remove lampholder (E).

cap (A) by turning

three screws (B),

washers (D).

1.

2.

3.

End

Place lampholder (E) in position.

Using wrench

install three screws (B),

lockwashers (C), and flat washer (D).

Install dust cap (A) by turning clockwise.

of Task.

TA249128

10-187