TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 222 of 1060

HEADLIGHT HARNESS BASE ASSEMBLY

INSTALLATION:

1.

Place gasket (A) imposition on vehicle.

2. Insert six electrical connectors (B) and

ground lead (C) through hole in vehicle.

3. Place base assembly (D) in position on

gasket (A) with slot (E) to the rear.

5.

6.

Apply silicone compound to six connectors (B)

REPLACEMENT

TM 5-5420-202-20-3

(Sheet 3 of 4)

located on front harness inside vehicle.

From inside vehicle, connect six con-

nectors (B) by pushing together.

NOTE

Make sure to connect connec-

4. Using wrench, install three screws (F),

lockwashers (G), and flat washers (H)

securing base assembly (D) to vehicle.

tors properly.

Use the metal

tags for identifying the proper

connections.

Using screwdriver, install ground

lead (C), lockwasher (J), and screw

(K) securing ground lead to hull.

Go on to Sheet 4

TA249124

10-183