TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 229 of 1060

TM 5-5420-202-20-3

POWER PLANT WARNING LIGHT REPAIR (Sheet 2 of 2)

CLEANING AND INSPECTION:

1. Clean lens (A) with moist, lint free cloth.

2. Using steel wool, remove any corrosion from connector terminal (K) of lamp

assembly (G).

3. Inspect lens for cracks or deep scratches. Replace if any are found.

INSTALLATION:

1.

2.

3.

4.

5.

6.

Using fingers, connect electrical connector (A), to light assembly (B).

Using screwdriver, secure light assembly (B), to bracket (C), with two

screws (D) and lockwashers (E).

Insert

Using

Place

Place

lamp (F) in socket.

Press in and turn slightly right, and release to secure.

adjustable wrench, install adapter (G).

packing (H) on adapter (G), and install lens (J) finger tight.

MASTER BATTERY switch to ON and check that lamp (F) lights.

End

of Task

TA249131

10-190