TM 5-5420-202-20-3
DOMELIGHT ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Place resistor assembly (A) in position on domelight assembly (B).
Insert two screws (C) and lockwashers (D) in screw holes of domelight assembly.
Place two external tooth lockwashers (E) over screws (C).
Aline domelight (B) on mounting bracket of vehicle.
Tighten screws (C) with fingers.
Using socket and extension, install two remaining screws (C), lockwashers (F), and
external tooth lockwashers (G).
Using socket and extension, tighten two screws (C).
Using fingers, connect two electrical connectors (H).
Check operation of domelight (TM 5-5420-202-10).
End of Task
10-192
TA249133