TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 366 of 1060

TM 5-5420-202-20-3

BASKET/CONTROL PANEL POWER HARNESS REPLACEMENT (Sheet 2 of 4)

2.

Disconnect connector (C) at basket disconnect

(page 10-296.69).

(D), lockwasher (E), and flat washer (F)

securing strap (G) at three locations.

Leave bottom screw (H) installed.

4.

Using 7/16 inch socket, remove screw

(J) and lockwasher (K) securing clamp

(L) at six locations.

5.

Using fingers, slip basket/control panel

power wiring harness (M) from behind straps

(G), out of clamps (L), and remove from

vehicle.

NOTE

The illustration below shows the

location of

harness

assembly

supporting clamps and straps and

the routing of the harness assembly.

Go on to Sheet 3

5-28

10-296.26

Change 7

3.

Using 7/16 inch socket, remove top screw