TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 372 of 1060

TM 5-5420-202-20-3

BASKET/CONTROL PANEL STARTING HARNESS REPLACEMENT (Sheet 4 of 5)

INSTALLATION:

1.

2.

3.

4.

Place harness assembly (A) in position

behind straps (E) and through clamps

(H) as shown.

Using 7/16 inch socket, install screws

(B), new lockwashers (C), and flat washers

(D) to secure straps (E) at three locations.

Using 7/16 inch socket, install screws (F)

and flat washers (G) to secure clamps (H)

at six locations.

Using 7/16 inch socket, install screws

(J) and new lockwashers (K) to secure

clamps (L) at vehicle floor and at purge

pump handle (M).

Go on to Sheet 5

5-34

10-296.32

Change 7