TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 384 of 1060

TM 5-5420-202-20-3

BASKET/LIGHT SWITCH HARNESS REPLACEMENT (Sheet 6 of 9)

INSTALLATION:

1.

2.

3.

4.

Route wiring harness (A) through clamps and behind straps, as shown.

Using 7/16 inch socket, install screws (B), new lockwashers (C), and flat washers (D)

to secure straps (E) at three locations.

Using 7/16 inch socket, install screws (F) and new lockwashers (G) to secure clamps

(H) at six locations.

Using 7/16 inch socket, install screws (J)

and new lockwashers (K) to secure clamp

(L) containing harness assembly circuits

75, 75, 509L, 509L, and 517.

NOTE

This illustration shows general

routing of the harness assembly and

the locations of supporting straps

and clamps.

Go on to Sheet 7

5-46

10-296.44

Change 7