TM 5-5420-202-20-3
MASTER CONTROL PANEL REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
2.
3.
Using one wrench, grip head of
screw (hidden) on bottom rear
of master control panel (A).
Using other wrench, remove nut (B)
and lockwasher (C) securing ground
strap (D) to master control panel (A).
Remove ground strap (D).
NOTE
Some vehicles may not be equipped
with switch assembly (F).
5.
Using wrench remove four
screws (G) and lockwashers
(H) securing panel (A) and
switch assembly (F) to mount-
ing bracket (J).
6.
Lay switch assembly (F) aside.
Go on to Sheet 3
NOTE
Cables (E) must be removed from left to
right or right to left.
4. Using spanner wrench, remove
four
rear
cables (E) from bottom
of master control panel (A).
10-35