TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 68 of 1060
TM 5-5420-202-20-3
ENGINE FUEL INJECTION PUMP: FUEL SHUTOFF LEAD REPLACEMENT (Sheet 4 of 5)
INSTALLATION:
1.
2.
3.
4.
5.
6.
Install connector (A) of replacement lead through engine shroud from engine side of shroud.
Using cross-tip screwdriver and 1/4 inch wrench, secure connector (A) with four screws,
washers, and nuts. Make sure nuts are inside engine shroud.
Install connector (B) on fuel pump (C).
Tighten retaining nut (D) using slip joint pliers.
Using pliers, install lockwire.
Position lead (E) next to line (F) and install three loop clamps (G).
Go
on to Sheet 5
TA248972
10-31
Back to Top
