TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 833 of 1060

TM 5-5420-202-20-3

TRACK SUPPORT

ROLLER REPLACEMENT (Sheet 11 of 11)

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

Place static ground spring (W) into access cover

plate (X) so tang is in hole inside cover plate.

Twist spring (W) into place.

Position new gasket (Y) and cover (X) to hub

and secure to hub with six lockwashers (Z),

flat washers (AA), and screw (AB).

Using 9/16 inch socket, tighten screws

alternately.

Using grease gun to lube fitting on cover

plate, lube roadwheel (LO 5-5420-202-12).

If jack was used, lower it. Remove jack and planks (or plates).

Have second person start engine and move vehicle so two centerguides can be installed

(TM 5-5420-202-10).

Install centerguides (TM 5-5420-202-10).

Test drive vehicle a short way (TM 5-5420-202-10).

Adjust track tension (TM 5-5420-202-10).

End of Task

TA249571

14-44