TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 841 of 1060

TM 5-5420-202-20-3

COMPENSATING IDLER WHEEL AND ROADWHEEL REPLACEMENT (Sheet 3 of 4)

2.

3.

4.

5.

Get roadwheel arm lifter tool.

Place lifter to inside of track over spindle

stub, track pad, and end connector that

is forward of roadwheel.

Have second person start engine and drive

vehicle forward slowly.

Direct second person to stop vehicle when

lifter is straight up and down.

6.

Roadwheel should be up off track centerguides.

7.

Set vehicle brakes (TM 5-5420-202-10).

Shut engine off (TM 5-5420-202-10).

WARNING

Failure to block vehicle properly

may result in injury or death to

personnel.

8.1 On both sides of vehicle, position

wooden blocks between track and

roadwheel at front and rear of

roadwheel.

Go on to Sheet 4

14-52

Change 4