TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 848 of 1060

TM 5-5420-202-20-3

MECHANICAL TRACK ADJUSTING LINK REPAIR (Sheet 1 of 3)

TOOLS: 3/4 in. sliding tee

7/16 in. combination box and open end wrench

9/16 in. combination box and open end wrench

Hammer

Center punch

Chisel

Grease gun

Mounted vise

SPECIAL TOOLS: Bearing driver (Item 30.2, Chapter 3, Section I)

SUPPLIES:

Lube fitting

Rags (Item 65, Appendix D)

Grease (Item 37, Appendix D)

Lockwasher

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Disconnect track (TM 5-5420-202-10)

Remove compensating idler wheel (page 14-51)

Remove track adjusting link assembly (page 14-59)

DISASSEMBLY:

1. Using 7/16 inch wrench, remove grease fitting (A) from link (B).

2.

Using 9/16 inch wrench, remove bolt (C) and lockwasher (D).

Go on to Sheet 2

Change 4

14-59