TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 850 of 1060

TM 5-5420-202-20-3

MECHANICAL TRACK ADJUSTING LINK REPAIR (Sheet 3 of 3)

3.

Using hammer and center punch, stake bearing

(B) into link (A) in three places (both sides).

4.

Install bolt (C) and Iockwasher (D) at other

end of link.

5.

6.

Using 9/16 inch wrench, tighten bolt (C) in

place.

Using 7/16 inch wrench, tighten new grease

fitting (E) into position in link (A).

NOTE

For easy access with grease gun, fitting (E) should be pointing

outward when link (A) is installed to vehicle.

7.

Using grease gun, grease fitting (E) to make sure it is not plugged.

8.

Install track adjusting link assembly (page 14-57).

End of Task

TA249588

14-61