TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 849 of 1060

TM 5-5420-202-20-3

MECHANICAL TRACK ADJUSTING LINK REPAIR (Sheet 2 of 3)

3.

Using hammer and chisel, cut stakes at three

places (both sides) that hold bearing (E) in eye

end of link (B).

4. Position bearing driver to bearing in link (B).

Using 3/4 inch sliding tee, press bearing out of

link eye.

5.

Inspect parts (A) through (E). Replace them as

necessary.

ASSEMBLY:

1.

Position link (A) so eye end is facing upward.

NOTE

Make sure bearing is evenly

mounted in link eye.

2.

Using bearing driver, carefully press bearing

(B) into eye of link (A).

Go on to Sheet 3

14-60

Change 4