TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 825 of 1060

TM 5-5420-202-20-3

7.

8.

TRACK SUPPORT ROLLER REPLACEMENT (Sheet 3 of 11)

NOTE

If plank or base plate is not available, position jack on

roadwheel near roller and raise track.

NOTE

If hydraulic jack is not available, disconnect track (TM 5-5420-

202-10). Then move vehicle in reverse until track is off roller.

Using wooden plank or metal plate as base on

roadwheel, position hydraulic jack.

Using jack, raise track so it clears roller.

NOTE

Safety block must be

shown.

installed as

Using 9/16 inch socket, remove six screws (A),

lockwashers (B), and flat washers (C) securing

access cover plate (D) and gasket (E). Throw

gasket (E) away.

G

O

on to Sheet 4

14-36

TA249563