TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 820 of 1060

TM 5-5420-202-20-3

TORSION BAR ANCHOR REPLACEMENT (Sheet 1 of 3)

TOOLS: 3/4 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Putty knife

Extractor tool set

Portable drill and drill set

Crowbar

Pry bar

SUPPLIES: Gasket

Pins (2 required)

Lockwashers (4 required)

Corrosion preventive (Item 82, Appendix D)

Solid film lubricant (Item 83, Appendix D)

PRELIMINARY PROCEDURE: Remove torsion bar from exact opposite side of vehicle

REMOVAL:

1.

Using socket, remove four

screws (A) and lockwashers

(B) securing cover (C) to

roadwheel housing (D).

(page 14-24)

G

O

on to Sheet 2

Using pry bar, pry cover (C) free from

housing (D).

Remove cover (C), gasket (E), and anchor (F)

as assembly from housing (D). Throw gasket

(E) away.

Change 4

14-31