TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 811 of 1060

TM 5-5420-202-20-3

ROADWHEEL SUPPORT HOUSING ASSEMBLY

TOOLS: 1-5/16 in. socket with 3/4 in. drive

Ratchet with 3/4 in. drive

Hammer

36 in. extension bar

Drift pin punch

SUPPLIES:

Lockwashers (9 required)

REPAIR AND REPLACEMENT

10 in. adjustable wrench

Slip joint pliers

(Sheet 1 of 2)

Torque wrench with 3/4 in. drive (0-600 lb-ft)

(0-814 N.m)

Corrosion preventive (Item 79, Appendix D)

Solid film lubricant (Item 80, Appendix D)

PERSONNEL: Two

PRELIMINARY PROCEDURES:

Remove roadwheel arm (page 14-2)

Remove torsion bar anchor (page 14-31)

NOTE

There are six support housings on

each

side

of

vehicle.

The

procedures for all six are identical

except that no. 1 housing is not

interchangeable.

NOTE

Use jack to support housing

during removal and installation.

REMOVAL:

1.

Using socket with ratchet, remove nine

screws (A) and lockwashers (B) securing

roadwheel support housing (C) to hull.

2.

Remove housing (C) and gasket (D) from hull

mounting place. Throw gasket (D)

away.

Go on to Sheet 2

14-22