TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 805 of 1060

TM 5-5420-202-20-3

HUB ASSEMBLY REPLACEMENT (Sheet 2 of 7)

3.

4.

5

.

.

7.

8.

9.

10.

11.

12.

Remove spring (F) from inside of cover plate (D).

Using hammer and drift punch, bend back tab of bearing nut lock (G).

Using 2-1/2 inch socket, loosen nut (H). Remove nut (H), bearing nut lock (G), and lock (J).

Throw bearing nut lock (G) away if used more than four times.

Using

Using

socket wrench with 3/4 inch ratchet, remove nut (K).

pinch bar on hub, if necessary, remove hub (L) and bearing (M).

9/16 inchsocket with hinged handle, remove eight screws (N) and lockwashers (P)

Using

securing seal assembly (Q) to hub (L).

Remove inner bearing (R), gasket (S), and seal assembly (Q). Throw gasket away.

Separate preformed packing (T) from arm assembly. Throw packing away.

14-16

Change 4