TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 795 of 1060

TM 5-5420-202-20-3

ROADWHEEL ARM REPAIR (Sheet 2 of 9)

DISASSEMBLY:

1.

Using pliers, bend key washer tabs back out of

slot in nut.

2.

Put spanner wrench on nut (A) so pins fit

into slots. Using spanner wrench and handle,

remove nut.

3.

Remove key washer (B) and bearing washer (C).

Throw bearing washer (C) awav.

Keep inner

set. If you

NOTE

and outer races of bearings together as matched

throw away one race, throw away other one.

4.

Use sleeve spacer (D) like a slide hammer to loosen inboard bearing (E). Remove bearing.

5.

Remove sleeve spacer (D) and outboard bearing (F).

6.

Pull oil seal retainer (G) off upper spindle (H).

Go on to Sheet 3

14-10

Change 4