TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 793 of 1060

TM 5-5420-202-20-3

8.

9.

10.

11.

12.

13.

14.

15.

16.

Position retainer (E) so that its jackscrew holes

are at top and bottom of upper spindle.

Using pin punch, aline six mounting holes in

retainer (E) to holes in housing.

Put six lockwashers and screws (G) into

mounting holes.

Using crowfoot wrench and torque wrench,

tighten six screws (G) alternately and evenly to

95-125 lb-ft (129-169 N.m).

Connect adjusting link at No. 1 roadwheel

position, if necessary (page 14-59).

Install shock absorbers if roadwheed arms were

removed from positions No. 1, 2, and 6 (page

14-96).

Install suspension torsion bar (page 14-27).

Install wheel hub if removed (page 14-18).

lnstall roadwheels (page l4-53).

End of Task

14-8