TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 816 of 1060
TM 5-5420-202-20-3
SUSPENSION TORSION BAR REPLACEMENT (Sheet 4 of 7)
16.
17.
If torsion bar is broken, use adjustable wrench
to remove plug at opposite side of vehicle.
Stick rod through plug hole. Using mallet, tap
rod to drive torsion bar out from other end.
Replace torsion bar or other parts found
defective.
INSTALLATION:
CAUTION
Six torsion bars (E) on one side of vehicle are different from six
bars on other side. Left side bars have arrow pointing counter-
clockwise. Right side bars have arrows pointing clockwise.
14-27
Back to Top
