TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 829 of 1060

TM 5-5420-202-20-3

TRACK SUPPORT ROLLER REPLACEMENT (Sheet 7 of 11)

INSTALLATION:

1.

Aline hole in axle (A) with hole in housing when mounting axle.

3.

4.

5.

2.

On left front support roller ONLY, using

hammer, drive two new spring pins through

housing into axle (one from each side).

Continue driving spring pins (B) in until they are both flush (even) with housing surface, as shown.

Position dome of both plugs (C) to outside. Using hammer and 3/4 inch punch, drive plugs into

place (both sides).

When plugs are fully seated, using hammer and 3/16 inch alining punch, force edges of dome into

hull housing.

Go on to Sheet 8

TA249567

14-40