TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 117 of 534

TM 5-5420-202-20-4

INNER EXHAUST PIPE REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

1.

2.

3.

4.

5.

6.

Install insulation (A) over hose part

of pipe (B).

Slide clamp (C) into position on pipe

(B).

Using hammer, lightly tap flange (D)

onto exhaust elbow end of pipe (B).

Using hammer and chisel, tap sleeve

(E), with tapered end of sleeve away

from flange (D), onto pipe (B).

NOTE

Sleeve (E) butts

UP

to flange (D) to

hold flange in place. It may be neces-

sary to use hammer and punch to aid

in mating the two flanges.

Position heater pipe (B) to exhaust elbow

(F) so flange (D) mates to flange on

elbow.

Slide coupling clamp (G) over mating

flanges. Install nut (H) onto coupling

clamp (G). Using wrench. tighten nut

(H).

Using socket with extension, install screw (J) with lockwasher (K) securing clamp (C)

hull.

Install personnel heater (page 18-5).

to

TA248620

18-21

End of Task