TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 111 of 534

TM 5-5420-202-20-4

PERSONNEL HEATER MOUNTING CLAMP REPLACEMENT (Sheet 1 of 1)

TOOLS:

Flat-tip screwdriver

Metal cutting shears

PRELIMINARY PROCEDURE:

Set MASTER HEATER switch to OFF (TM 5-5420-202-10)

REMOVAL:

1.

Using screwdriver, remove either one or all three clamps (A), as necessary.

2.

If clamps are too rusted or old to remove,

use screwdriver and pry clamp away from

mounting bracket (B) or heater (C).

Then, using shears, cut clamp free.

INSTALLATION:

1.

Install new clamp (A) around mounting brackets (B) or heater (C), as necessary.

2.

Using screwdriver, tighten clamp (A).

End of Task

TA248614

18-15