TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 113 of 534

TM 5-5420-202-204

PERSONNEL HEATER AIR DUCT OUTLET HOSE AND DEFLECTOR REPLACEMENT

(Sheet 1 of 3)

TOOLS: 9/16 in. combination box and open end wrench

9/16 in. socket with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

7/16 in. open end wrench

Flat-tip screwdriver

Lockwashers (7 required)

SUPPLIES:

REMOVAL:

1.

Using screwdriver, loosen hose clamp

(A).

2.

Using 9/16 inch socket, remove two screws (B), lockwashers (C), and nuts (D) securing

clamp (E) to pads.

3.

Remove clamp (E).

4.

Hold nut (F) with 7/16 inch wrench.

Use 7/16 inch socket to remove screw (G),

lockwasher (H), washer (J), and spacer (K) securing deflector (L) to bracket (M).

5.

Pull deflector (L) from hose (N).

Go on to Sheet 2

TA248616

18-17